|
Author
|
Topic: Help with ID on a nine inch rear end
|
Fastymz
Moderator Posts: 8931
From: Reno Nv USA MEM#1240
Registered: Apr 2001
|
posted 10-24-2001 12:36 AM
   
I trying to ID the nine rear in my pops new T-bucket.The numbers are from the tag.
#wes t 1 sac 2.75 9951 a
I know its not a traction lok.The wheels spin in different ways.It has the same size tubes from end to end.
Thanks for the help.------------------
65 Coupe with a stock 1969 351w, Edelbrock RPM intake,carter625cfm,shorty Hedmen hedders,2.5 exhaust,Flowmasters,Black Magic electric fan,stock C4,peg leg 8" 2:80,Big Boss 429 hood scoop,Cragers SS,Black Suede finish.
https://mustangsandmore.com/ubb/Fastymz.html
MEM#1240
IP: Logged |
franklin
Gearhead Posts: 128
From: VA
Registered: Nov 2000
|
posted 10-24-2001 12:51 AM
Here's a little bit of info:http://hiqties.hypermart.net/9inch.html Looks like you have a 2.75 to 1 ratio.
IP: Logged |
Fastymz
Moderator Posts: 8931
From: Reno Nv USA MEM#1240
Registered: Apr 2001
|
posted 10-25-2001 01:27 AM
Thanks Franklin,lots of good info.Dose any one else have any info to add.
Thanks Ron------------------
65 Coupe with a stock 1969 351w, Edelbrock RPM intake,carter625cfm,shorty Hedmen hedders,2.5 exhaust,Flowmasters,Black Magic electric fan,stock C4,peg leg 8" 2:80,Big Boss 429 hood scoop,Cragers SS,Black Suede finish.
https://mustangsandmore.com/ubb/Fastymz.html
MEM#1240
IP: Logged | |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
