Engine mount question for a 68 289 . . . - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'64 1/2 to '73 -- The Classic Mustang

Engine mount question for a 68 289 . . .

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: Engine mount question for a 68 289 . . .
Ralph Rebandt Gearhead Posts: 517 From: Farmington Hills, MI Registered: Feb 2000	posted 10-15-2001 06:36 PM Quick question. I am changing from a 6 cyl to a 289. I have the engine mounts for both the frame and the block. My question regards the block mounts with the 7" spread holes. There are 2 holes that bolt to the block and a rectangular part. One hole is closer to the rectangular base and the other is farther away. Which bolt hole goes to the front of the engine? My boxes from NPD do not indentify the engine mount as right or left.... Thanks... IP: Logged
67coupe Gearhead Posts: 484 From: dallas NC usa Registered: Nov 2000	posted 10-15-2001 10:09 PM they are actually the same mount the bosses on the engine are off set to make them line up right ------------------ Josh 67 coupe with 351c 94 Explorer 30 model A currently rustbucket in process 67 convt with efi 5.0 and t5 IP: Logged
Ralph Rebandt Gearhead Posts: 517 From: Farmington Hills, MI Registered: Feb 2000	posted 10-16-2001 12:46 AM Thanks. I actually noticed that they are the same. Does it matter which way they go as long as they are the same on both sides? Should the shorter side go to the front or back? a dummy installer. . . IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]