|
Author
|
Topic: electronic ignitionin a 69 stang
|
Mike65
Gearhead Posts: 1571
From: Columbia,NJ, USA. 65 Fastback, 69 Coupe MCA #-04549
Registered: Dec 2000
|
posted 08-17-2001 10:36 PM
   
Maybe someone can help me out, when I swap the 302 & aod auto trans into my 69 coupe, does anyone know how to adapt the electronics to the 69 Mustang so I can keep the electronic igntion & the fuel injection from the 87 LTD the engine & trans is be donated from?.------------------
Mike & Robin
65 Mustang Fastback
87 Crown Vic
96 Ranger Extd Cab
99 Explorer Sport
M&M #- 890
MCA #- 04549
IP: Logged |
SteveLaRiviere
Administrator Posts: 24286
From: Saco, Maine Toys: '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
Registered: May 99
|
posted 08-17-2001 11:11 PM
Do you have access to the donor car, there will be alot of small parts you'll want to swap over.You'll have the type of fuel injection that has the throttle body on the driver's side. ------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC
Ford. The closer you look, the better WE look!
IP: Logged |
Mike65
Gearhead Posts: 1571
From: Columbia,NJ, USA. 65 Fastback, 69 Coupe MCA #-04549
Registered: Dec 2000
|
posted 08-19-2001 07:28 PM
Steve,
Yes I do have acess to the doner car, i still have the car. What do I need to take from it before I junk it?.------------------
Mike & Robin
65 Mustang Fastback
87 Crown Vic
96 Ranger Extd Cab
99 Explorer Sport
M&M #- 890
MCA #- 04549
IP: Logged |
franklin
Gearhead Posts: 128
From: VA
Registered: Nov 2000
|
posted 08-19-2001 09:13 PM
Here are a couple links. One is a swap into an older pickup, but it should give you some idea what is involved.http://www.windsor-fox.com/ http://www.ford-trucks.com/articles/5liter.html
IP: Logged |
SteveLaRiviere
Administrator Posts: 24286
From: Saco, Maine Toys: '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
Registered: May 99
|
posted 08-19-2001 09:25 PM
Mike, I wouldn't junk the car until you are finished with the conversion.You'll need all the sensors, harnesses, CPU, and fuel supply line and return line, along with the electric fuel pump. You'll also want all the clips and retainers for the harnesses and lines. I think it would be a lot easier if you could swap all the components directly instead of fishing them out of boxes. ------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC
Ford. The closer you look, the better WE look!
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
