So, I screwed up by not noting the connection on the master cylinder to the junction box now I am a bit confused. wondering if anybody can help me out. thanks.. I have a pre 2/1/67 built 67 fastback 289 with power front disks. So, There is a Junction Box with 3 outlets on top, 1 on the front end, 2 on the bottom. Master Cylinder has 2 reservoirs, an outlet for each. I know the brake light switch goes in the center outlet on top of the junction box. I am going to assume this:
LH Front brake line goes to front end outlet on box, RH Front brake line goes to bottom front outlet on box. The top front outlet on the box goes to the front reservoir on the master cylinder.
The Rear brake line goes to the bottom rear outlet on the box, the top rear outlet goes to the rear reservoir on the master cylinder.
Does this seem right? Thanks!!
------------------
Joe Rush
67 Fastback-289
89 LX Hatchback 5.0
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
posted 07-17-2001 02:27 PM
