|
Author
|
Topic: sway arm bushings
|
joer
Gearhead Posts: 153
From: Westminster, California, USA
Registered: Aug 99
|
posted 04-22-2001 09:48 PM
   
How in the world do you get the big sway arm bushing on over the end of the bar? It looks like it can't be done? Thanks!Joe
IP: Logged |
steve'66
Gearhead Posts: 8796
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 04-23-2001 12:15 PM
Joe,Isn't the urethane bushing split? SteveW
IP: Logged |
joer
Gearhead Posts: 153
From: Westminster, California, USA
Registered: Aug 99
|
posted 04-23-2001 12:20 PM
nope, it's midolyn (spelling)?? and it is one peice. Should it be split?
IP: Logged |
Tom351
Journeyman Posts: 93
From: Marietta,GA
Registered: Mar 2001
|
posted 04-23-2001 12:28 PM
Is it a stock bushing on a larger-than-stock bar?------------------
67 Fastback - Arctic White Pearl paint
351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Carter 750 CFM, Comp. Cam 477/510 219/[email protected], Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars.
IP: Logged |
joer
Gearhead Posts: 153
From: Westminster, California, USA
Registered: Aug 99
|
posted 04-23-2001 12:30 PM
It's a stock size perfomance bushing on a stock bar.
IP: Logged |
steve'66
Gearhead Posts: 8796
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 04-23-2001 12:32 PM
Mine were cut on the flat side if I remember right, so you can open it up and push it onto the bar. SteveW
IP: Logged |
fordfan
Gearhead Posts: 3092
From: Walla Walla, Wa, USA
Registered: Jun 99
|
posted 04-23-2001 02:03 PM
My new Miylodyn (Canadian Mustang) Sway arm bushings 1" bar are cut on one side.. just now noticed it------------------
*WARNING: RATED MA for Mature Audiences only!* Joseph J Shaffer IV
Walla Walla, WA
MustangsandMore Member# 37
'68 Mustang Coupe, 2.79 gears.
'64 Mercury Comet, 2.80 gears
'62 Ford Falcon 2dr Wagon
'43 Dodge WC-53,FACTORY 5.83 gears i belive!
'41 Chevy Pickup, No rear, no gear!
'70 Chevy Pickup
IP: Logged |
joer
Gearhead Posts: 153
From: Westminster, California, USA
Registered: Aug 99
|
posted 04-23-2001 02:04 PM
Now I'll have to go home and make sure I'm not just seeing things. I don't think mine are cut but I could be smoking too much crack or something 
IP: Logged |
fordfan
Gearhead Posts: 3092
From: Walla Walla, Wa, USA
Registered: Jun 99
|
posted 04-23-2001 02:15 PM
Even with the slits, these bushings are not very flexable and will be a PNTA to get on (maybe thats why they sent 4 bushings and Brackets ???? same with the sway bar end links...  ------------------
*WARNING: RATED MA for Mature Audiences only!* Joseph J Shaffer IV
Walla Walla, WA
MustangsandMore Member# 37
'68 Mustang Coupe, 2.79 gears.
'64 Mercury Comet, 2.80 gears
'62 Ford Falcon 2dr Wagon
'43 Dodge WC-53,FACTORY 5.83 gears i belive!
'41 Chevy Pickup, No rear, no gear!
'70 Chevy Pickup
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
