|
Author
|
Topic: fuel sending unit Wiring
|
fsiewert
Gearhead Posts: 38
From: reedsport, OR, USA
Registered: Jun 99
|
posted 04-17-2001 02:01 AM
   
OK, can someone tell me the rout the gas gague wiring takes after it leaves the gas tank? My 66 coupe wiring goes through a hole in the right side of the trunk floor then through space to the wiring loom in the upper left front corner of the trunk. it's noot long enough to be mounted out of the way so it's just hanging there. Thx------------------
66 Silver Blue CP
351w Auto
Trickflow Heads
Other Items to Numerous to Mention.
IP: Logged |
mvierow
Gearhead Posts: 209
From: Bay Area, Ca
Registered: Apr 2001
|
posted 04-17-2001 12:33 PM
Thats the right path, but it sounds like your line is not long enough for some reason.. it should follow right above the tank and over to the left quarter panel where it goes over the wheel hump, behind whatever you call where the left rear window crank is, along the running board to the kick panel where that harness is joined with the main harness. They are not that cheap to replace so unless your tail lights are having problems, or the harness is in really poor condition, i'd recommend just splicing in some addition length for under the car.
IP: Logged |
fsiewert
Gearhead Posts: 38
From: reedsport, OR, USA
Registered: Jun 99
|
posted 04-18-2001 11:58 AM
Thanks, that's what I thought. I'll add some extra length to it and get it out of the way.
IP: Logged |
Mustangsandmore Forums
