Brought to you in part by:
Topic: clutch pedal spring is done
Registered: Mar 2001
posted 04-10-2001 07:19 AM
The clutch pedal spring is finally in, anyone who needs to do this can try what I did,
I used a floor jack to stretch the spring open so I could insert 6 screws (5/16 x 1) into the coils, after the spring is in, use a ratchet and socket to remove the screws, still a pain but it worked pretty good.
67 stang 5 speed
91 f-150 xlt
98 explorer xlt sohc v-6
First car was GM, all since FORDS
From: Lyons, IL, USA
Registered: May 99
posted 04-10-2001 11:07 PM
Thanks for the tip!
Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member
Fleet of FoMoCo products
US Class Nationals link
Contact Us | Mustangsandmore Front Page
Copyright 2005, Steve LaRiviere. All Rights Reserved.
Ultimate Bulletin Board 5.47d