Posts: 103 From: Laguna Niguel, CA Registered: Feb 2001
posted 03-27-2001 05:11 AM
Hey Kids,
I was intending to put a Pertronix ignition in my '70 Mach I, 351W, 4spd. It seems that just about everyone recommends doing that. Lately I've been told I should go with an MSD 6AL. Can these two work together? Is that recommended? Any tricks to installing them together?
Posts: 742 From: Thomaston,CT. Registered: Jan 2001
posted 03-27-2001 07:50 AM
They work very well together! I don't have the wiring diag. with me right now but it is very easy. I would reccomend if you haven't already bought the MSD to look at the Crain unit 1st! It is cheaper and its a more up to date unit! I know there will be alot of other opinions on this,So go to Crains web page and read the compairisons for yourself! Call Jacobs and ask them what they think! Alot of the guys in my area are moving twards The Jacobs pro-10 or the Crain units!www.shopcranecams.com/cranecams/index.html
[This message has been edited by 69maverick (edited 03-27-2001).]