|
Author
|
Topic: Aussie 351 C rods
|
Hipo67
Gearhead Posts: 133
From: Sioux City, IA, USA
Registered: JUL 99
|
posted 04-13-2000 10:21 PM
 
Hey, I'm on a roll tonight ... can anyone give me information on the rods out of the Australian 351 cleveland? Length center to center, width, large end and small end diameters?
|
Juggalo
Journeyman Posts: 8
From:
Registered: SEP 99
|
posted 04-14-2000 09:48 PM
I dont know for sure,but I was told that the aussie heads we like so much are from the aussie 302.Can anybody confirm that? Jug
|
Daniel Jones
Gearhead Posts: 790
From: St. Louis, MO
Registered: AUG 99
|
posted 04-16-2000 03:30 PM
Yes, the desirable Aussie heads and rods are actually from the
destroked Aussie 302C. The Aussie 351C heads are typically open
chamber 2V, though they also imported 4V's for a time. 302C rods
are 6.025", other than that they are supposed to interchange with
351C rods. FPP sells them so they would know for sure.Dan Jones
|
Alex
Gearhead Posts: 148
From: Melbourne, Vic, Australia
Registered: JUN 99
|
posted 05-03-2000 03:29 AM
From way back... Yup 302C rods are just like the normal ones but longer. I have a set in my 351. They are worth about $US 50 set here (+ the cost of re-sizing and bolts etc). Check you can get pistons (pin is the same, but higher up the piston for clearance).
|
Mustangsandmore Forums
