How do I do place an ad?

Effective 9/25/99, all ads are free for Members only. For non-members, the rate is $10/month, payable in advance. We will now accept business ads {on this Classified Ads page only} at the rate of $35/month, payable in advance.

Simply e-mail the webmaster with your Member Name and write-up of your ad. Member's ads will be kept on as long as the member wishes. You may send up to two images to place in your ad.

Non-members and businesses:
Send your ad and ad fee to:
Steve LaRiviere
73 Shadagee Road
Saco, Maine 04072

You may send up to two images to place in your ad. I will place your ad as soon as I can.

Cars and Trucks For Sale

~June 3, 2000*****FOR SALE 1969 Ford Fairlane coupe.

Blueprinted and balanced 302 Ford, factory "cobra" high rise, rebuilt c-4, kevlar clutches, shift kit, holly 600 vac, headers, power steering box with a texas mustang manual adapter, 1-1/4" front sway bar--3/4" rear, new balljoints, wheel bearings, 4 core rad., water pump, alt, starter. extra body parts: 4 doors, trunk lid, three hoods, two sets of side and rear window glass, two sets bumpers, chrome trim, dash inst. 70 fairlane disc brake spindles, 70 fairlane calp., 70 power brake, dodge cop wheels (set), 14" wheels, 14" mag deep dish uni-lugs 8"-7". new 9" 3:70 posi. bearing clutches ect. balanced drive shaft, 2:90-9" center. complete 8" brake to brake. 72 big block fairlane drums front and rear. $4,500 or $2,500 and your two door ford wagon, 63-64-65 falcon sprint, 53-54-55 stude post sedan all of these no motor needed.

Car located at 414 Calhoun Place, Orlando, Florida 32801 Tel. 407-895-6128

Cars and Trucks Wanted

~February 7th 2000*****Wanted Shelby GT350. Must be able to be verified by SAAC.

Diecast Cars and Trucks Wanted

~June 3, 2000*****I'm looking for an arcadian blue die-cast Mustang, '64-1/2 - '66.
Can be any body style but prefer coupe.

E-mail address:[email protected] or [email protected]

Carole (ctastang)
66 Coupe (Arcadian Blue, of course)

Parts for Sale

~June 7, 1999***** 71-73 Speedometer/Clock Instrument Cluster. Very rare Item. Asking ?
Intake manifold for '73 351 4V, {D3ZE} spreadbore with EGR plate and EGR valve. EGR valve holds vacuum. $125, buyer pays shipping. Located in Saco, Maine.
Steve LaRiviere

~June 14, 1999***** Two Total Control Products Rack and pinion conversion kits for 65-66 Mustang. Both new condition.
Originally retailed for $1000, sacrifice for $800 each.
Email me for details.

~July 4, 1999***** STUFF!!!! Many small block race parts new and used for 65-73 Mustang and whatever else we can fit them into! Headers, cams intakes, oil pans and God knows what else. E-mail me or dad with your needs.
Tony Denysenko

~August 8, 1999***** I have a radiator for sale. it fits these all: 1966, Ford custom, Fairlane, Falcon, Galaxy and Merc Comet. The part # is C5AE-8005. The Radiator has been Recored 4 years ago. It wasn't the correct rad. for my mustang, thats why I'm selling it. My full name is;
Robert Coates
716 Bowen St.
Oshkosh, WI 54901
Robert {Skip} & Claudia Coates

~August 10, 1999***** C90X-9424-A 351 Windsor, original, non-lettered Aluminum Intake. Beadblasted and painted 22 years ago. On the shelf ever since. $400.00. Milodon 8 quart 351 windsor oil pan, new, on the same shelf, $125.00. New Edelbrock Torker II 302 Intake, also fits 289, $130.00. 1994 Motorsport NEW 5.0 Shorty Headers (What's up SHORRRRTY?) New take-offs from a crate motor. Fits one year only (the only year they put a 5.0 in the new bodystyle), over $250 from Ford, one set only, price $175.00.
All prices plus shipping from Maryland.

~September 5, 1999****One very nasty Comp. Cam solid lifter cam w/lifters for 289/302. Comp Cam part number 31-336-4. Recommended for limited street use. 4000 stall or 4 speed, with 4.11 or lower, 11.5 to 1 comp. .592" lift w/1.60 rockers. 306 duration adv. 260 @ .050. 110 degree lobe sep. angle. $ 100.00 takes all.


~October 12, 1999****All parts from a 73 coupe black rear seat std, black std door panels complete, 3 speed man trans and alum bell, rear qtr extensions ea., p.s. steering gearbox, locking glove box door w/key, caliper mounting brackets, gas tank filler neck and gasket, 73 mach 1 grill complete, gauges only from a center section 30, radiator for man trans car (no trans cooler) good tanks needs re-cored, 4 each 71 and 73 hubcaps, 9 14 in. Ford steel rims, misc. int and ext trim and emblems, all window glass, lots of wiring connectors, all with about 3 in of wiring, misc. underdash pts (backup sw, neutral sw, ect) and more misc. passenger 72 torino sport mirror, 66 289 all or pts. All parts in working order and/or good shape, I can provide pic's. I would rather trade so let me know what you have 71-73 only thanks
Joe aka brockjoe

~October 22, 1999****I want to sell all this locally unless you pick it up in N.Virginia.

(4) 5-lug REAL Cobra R's with two Nitto Drag Radials and Two Dunlop D40 M2's. Set-up only has about 300 miles on it. $1000 Bassani Off-Road X-Pipe (Custom). Has small dent in pipe. Fits 98 Cobra. $200

Car Cover (NOAH Evolution 4) No Holes, great condition. Paid $169 new, will sell for $100.
Custom fit for 98 Mustang or the like.

Hurst Billet Pro shifter. Many who have tried it like it better than the Pro 5.0! $75

Rear-End Girdle and Stud kit for Ford 8.8. NEVER installed, brand new. $145.
If you want the gear oil and additive also, then it's $160.

2 Cobra fog light housings $20


~October 24, 1999*****Got lots of stuff that needs to go. C5AZ-C 427LR 8v intake $450, C6OE-B 289 4v intake $125, C7AE-B 428CJ rods $25 each, C3AE-C 427LR rods $25 each, DOAF-M 428PI distributor $200, C3SZ-A 390 6v intake with a few carb parts $400, C8OE-N 428CJ head $400, full gages with tach for '73 Mustang $300, rear quarter caps for '67 fastback Mustang $200 pair, C8OE-B 428CJ Mustang exhaust manifolds with spacer $500, C9ZE-E 428CJ radiator fan with clutch $200, ram-air air cleaner lid for '68 428CJ Mustang $400, IUB 428CJ crank M.010 R.020 $500, C8OE-C 428CJ intake $175, FE Mallory YC distributor $50. Offers?


~October 24, 1999*****I wanted to sell my superchip I got for my 93 Thunderbird 5.0. I am selling it for 100 Bux. I used it for about 3 months and it works great. Guess what; they cant get used up. It last forever and has a lifetime warrantee. Anyways, I have it programmed for a K&N air filter and speed limiter removed.

Fred Folkerts
FCR Racing
National Superchips Distributor
Email: [email protected]

~December 11th, 1999*****BRAND NEW SET of cast iron Trick Flow heads, bare and
untouched, in the boxes. Emissions legal. New were $2200. Offer?

Ford Motorsport GT40 upper and lower intake kit. NEW, never installed.
$600 in Summit. $500.00

New, in the box, NOS 100 HP kit complete with Bottle and ready to install.
Comes complete. $600 in Summit. $500.00

Harland Sharp 1.72 stud mount rockers. New in box, never installed. 7/16 stud.

73mm Pro M mass air meter. 30 lb injector electronics and K/N cone filter. Body alone is over $200.00 Brand new never installed. $225.00

5.0 stock lift with stock rockers race cams. 228/228 duration/.432 lift with
1.6 rockers. with 1.75 rockers similar to B303 Ford Motorsport cam. $150.00

All parts are plus shipping.
Contact "Capri" Tony Denysenko

~January 13, 2000*****67 Cougar Parts... all glass, most chrome, all lights,
right door, trunk lid. If you need it contact me I may have it.
Make an offer all or some, offer must consider shipping from Phoenix, AZ.
Matt McMullen

~March 8, 2000*****Mustang Toploader 64 1/2 tag# HEH-A nice inside $350
64-65 289 timing cover, nice and uncorroded $50
390 GT head one only # C8AE-H complete $75
62-65 Fairlane parts
Contact Tom @ (604)946-2891 or [email protected]

~March 13, 2000*****Parts For Sale an assortment of parts.
Most 67-68 Mustang, some 66 Mustang, some other Ford parts.

To see list and prices click here:

All prices plus shipping. Parts located in central New Jersey.

~March 26, 2000*****For Sale: 9" rear for 67-73 Mustang. Originally from a
73 Cougar (same as 71-73 Mustang) 1" wider per side than stock for 67-70 Mustangs.
Spring mounts are the same. Complete less center section. 28 spline NON-tapered axles.
3" long Moroso studs. Almost new axle bearings,brakes, wheel cylinders, etc.
Drop in a center section, hook the brake lines and go. Only $125 you pick up.

Wheels: 2 15X8 Weld Draglites 5.5" backspacing, Excellent condition, no rim
screws, includes center caps. $160 pair. Firm. Will ship for UPS cost.

These parts are located in Gadsden, Alabama.

~May 9, 2000*****
94 stock cobra wheels, 550.
5 lug conv. for fox body, 250.
cartech upper matching truck lower, 380.
carb vic jr intake heavily ported, 150.
30lb inj. matching 77mm TB, 300.
crane interceptorII with MANUAL, 400.
pics available


~May 20, 2000*****Brand new Paxton SN92 supercharger with pulley,
small billit aluminum carb enclosure, connecting tube and paxton/shelby
air filter cannister, no mounting bracket. $1000


Parts Wanted

~June 11, 1999*****Looking for NOS grille for '71-'72 Mustang with Sports Lamps. {Mach 1 style}
May consider perfect used.
Steve LaRiviere

~July 4, 1999***** 157 tooth C-4 bellhousings for 63 to 68 C-4's. C5OP I think is the casting number.
Tony Denysenko
or Alex

~October 24, 1999*****Wanted, a set of factory '93-'95 Lightning wheels, in good condition and in the Southern Maine, Eastern New Hampshire area. Tires not important, actually prefer them without.
Steve LaRiviere

~April 21, 2000*****I am looking for NOS weatherstrip for a 65-66 fastback.
I need the door bottoms(C5ZZ65205301A) and roof rails(C5ZZ63512223C). Thanks.

To Return to, click here.