1trickpony's {Dave Jedd} '69 Mach 1


1969 Mach 1 "S" code 390, 4-speed, 3.25 N 9" Trac-Loc rear end. I have had it since '88
and have done the majority of the work, with help from a fellow Mustang nut/best friend.

The body and interior are stock with the exception of some gauges, Hurst shifter and the 4-pt
roll bar. It has a fold down rear seat as well. Underneath I have sub-frame and crossmember,
the car is lowered 1", 1" frt sway bar, 3/4" rear sway bar w/panard bar (home-made).
Poly bushings throughout. 600# frt springs and 5 leaf rears all from TMC.

The 390 has 410 10.5:1 forged pistons, CJ size valves in port matched heads. Hooker ceramic
coated super comps, Edelbrock Perf-390 (need an RPM) with a massaged Holley 750 DFDP.
All the FE oil tricks have been done. HV Melling pump with a HD FPP shaft.

Comp Cams 292h-10 (.560/.560 292/244 110) cam with Comp Cams roller rockers and shafts,
Milodon 7 QT road race pan, remote filter w/ cooler. Mallory Unilite distributor with an
old school Accel super-coil. No MSD yet. =(

Here's Dave's e-mail address.


Return to Mustangsandmore.com
Return to the Mustangsandmore.com Member's Photo Gallery
Go to the next Member Page